How much seed per acre for a golf course? The amount of grass seed you need for a golf course acre changes a lot. It depends on many things, like what kind of grass you are planting, if you are planting a new course or fixing an old one, and what part of the course you are seeding. It can be anywhere from just a few pounds up to 500 pounds or even more per acre in special cases.
Image Source: mattguides.com
Deciphering Golf Course Seeding Rates
Grass grows on a golf course. To get grass to grow, you need seed. Seeding is the job of putting grass seed down. Golf course seeding rates tell you how much seed to spread. It is measured in pounds of seed for a certain size of land. The usual size of land is one acre. So, golf course seeding rates mean pounds of grass seed per acre golf.
Why do these rates change? Many things change the amount of seed needed. We can call these the factors affecting golf course seeding rates. These factors make the rates very different.
Key Factors Affecting Seeding Amounts
What makes the seed amount change? Lots of things. Thinking about these things helps you figure out how much seed to buy.
- What kind of grass you use: Different golf course grass types seeding needs different amounts. Some seeds are big. Some seeds are small. Some seeds sprout fast. Some sprout slow.
- Is it a new course or fixing an old one? Seeding new golf course construction needs a lot of seed. You start from dirt. Fixing an old course (called overseeding) needs less seed, but still a good amount.
- Which part of the course? Greens need a lot of seed. Fairways need less. The rough needs even less. Each part is used in a different way.
- When you are seeding: Spring or Fall seeding might need less seed. Hot summer seeding might need more seed. This is because more seed might die in the heat.
- How good the soil is: Soil helps seeds grow. Good soil helps more seeds grow. Bad soil means more seeds might not grow. You might need more seed in bad soil.
- How you plant the seed: You can just spread it. Or you can use special machines. Special machines help more seeds get into the ground. This means more seeds might grow.
- How much you can water: Seeds need water to sprout. If you can water a lot, more seeds might sprout. If you cannot water much, you might need more seed because some will not make it.
- Birds and bugs: Birds like to eat seeds. Bugs can hurt young grass. If there are many birds or bugs, you might need more seed.
- The weather: Too hot, too cold, too dry, too wet. Bad weather can stop seeds from growing. You might need more seed if the weather is not good.
- How thick you want the grass: Do you want grass to be very thick and smooth? Like on a putting green? Or is a little thinner okay? Like in the rough? Recommended grass seed density golf changes for different areas. More density needs more seed.
All these things work together. They decide the final pounds of grass seed per acre golf.
Seeding Different Parts of the Golf Course
A golf course has different areas. Each area is used in a special way. Because of this, each area needs a different type of grass. Each area also needs a different amount of seed.
Seeding the Putting Greens
The putting green is where you sink the putt. The grass here must be very smooth and even. It needs to be cut very short. Bentgrass is a common grass for greens. Sometimes Poa annua is there too.
Greens need a lot of seed. Why?
* The grass is cut very, very short. This stresses the plant.
* Many people walk on them. Foot traffic can hurt the grass.
* The grass must be very thick and perfect.
* New grass is often added to keep it thick. This is overseeding greens seeding rate.
For new greens construction, you might need 2 to 5 pounds of Bentgrass seed for every 1,000 square feet.
One acre is much bigger than 1,000 square feet. One acre is about 43,560 square feet.
So, for a full acre of new green, you might need:
(2 to 5 pounds / 1,000 sq ft) * 43,560 sq ft/acre = 87 to 218 pounds per acre.
That is a lot of seed! Bentgrass seeds are tiny. But you need millions of them to make a thick green.
For overseeding greens, you are adding seed to grass that is already there. You are just making it thicker or filling thin spots.
The overseeding greens seeding rate is lower than for new greens.
You might use 1 to 5 pounds of Bentgrass seed per 1,000 square feet for overseeding.
For a full acre of overseeding greens, this is:
(1 to 5 pounds / 1,000 sq ft) * 43,560 sq ft/acre = 43 to 218 pounds per acre.
The amount still changes a lot. It depends on how thin the grass is and how fast you need it to get thick.
Some greens use different grass, like Poa trivialis for winter color in warm places. The rate for this grass is different. It might be 5 to 10 pounds per 1,000 square feet. That is 218 to 436 pounds per acre for overseeding.
So, for greens, the pounds of grass seed per acre golf can be very high. This is true for new greens and for overseeding greens seeding rate.
Seeding the Fairways
The fairway is the short grass area between the tee box and the green. This is where most players hit their shots. The grass here is not as short as the green. But it still needs to be quite smooth and easy to hit from.
Fairways are much bigger than greens. They make up a large part of the golf course.
Common grass types for fairways include:
* Kentucky Bluegrass
* Perennial Ryegrass
* Fine Fescue
* Sometimes Bentgrass in cooler places.
Fairway grass seed per acre rates are lower than greens. You do not need the grass to be as thick and perfect as on a green.
For new fairway construction, you might use a mix of seeds. A common mix could have Kentucky Bluegrass, Ryegrass, and Fescue.
A typical rate for seeding new fairways is 3 to 5 pounds per 1,000 square feet.
For a full acre of new fairway, this is:
(3 to 5 pounds / 1,000 sq ft) * 43,560 sq ft/acre = 130 to 218 pounds per acre.
This is similar to the high end for new greens, but fairways use cheaper seeds usually.
For overseeding fairways, you add seed to existing grass. This fixes thin spots or changes the type of grass over time.
Overseeding rates are lower. You might use 1 to 3 pounds per 1,000 square feet.
For a full acre of overseeding fairway grass seed per acre, this is:
(1 to 3 pounds / 1,000 sq ft) * 43,560 sq ft/acre = 43 to 130 pounds per acre.
The exact rate depends on the grass type in the mix. Ryegrass seeds are bigger than Kentucky Bluegrass or Fescue seeds. So, if your mix has a lot of Ryegrass, you might use a higher weight per acre. But you still have about the same number of seeds per square foot.
Seeding the Rough
The rough is the longer grass area. It is usually next to fairways, greens, and tee boxes. The rough is meant to be a little harder to hit from. The grass does not need to be perfect. It does not need to be cut very short.
The rough makes up a lot of the golf course land.
Grass types in the rough are often cheaper and easier to care for.
Common grasses include:
* Tall Fescue
* Fine Fescue
* Sometimes Kentucky Bluegrass or Ryegrass mixes.
* Native grasses in some places.
Seeding rates for the rough are the lowest on the course. You do not need very thick grass.
For new rough construction, a typical rate is 2 to 4 pounds per 1,000 square feet.
For a full acre of new rough, this is:
(2 to 4 pounds / 1,000 sq ft) * 43,560 sq ft/acre = 87 to 174 pounds per acre.
For overseeding the rough, rates are even lower. You might just be fixing patches.
You might use 0.5 to 2 pounds per 1,000 square feet.
For a full acre of overseeding rough, this is:
(0.5 to 2 pounds / 1,000 sq ft) * 43,560 sq ft/acre = 21 to 87 pounds per acre.
Sometimes the rough is just left to grow naturally. No seeding is done at all.
Other Areas
There are other areas too, like tee boxes and practice areas. Tee boxes are like mini-fairways but get a lot of wear. They might need a rate similar to fairways, sometimes a bit higher because of damage from divots.
Practice areas can vary. A putting green practice area needs green rates. A driving range tee area needs tee box or fairway rates. Other parts of a practice area might need rough rates.
Seeding for New Construction vs. Overseeding
We talked about this a little already. But let us look at it more closely. Seeding new golf course construction is different from overseeding.
Seeding a New Golf Course
When building a new golf course, you start with bare ground. The goal is to get grass growing everywhere. You need a lot of seed to cover all the dirt. The seeding rate is higher for new construction in all areas (greens, fairways, rough) compared to overseeding.
Steps for new construction seeding:
1. Prepare the ground: Make the soil flat and smooth. Make sure water drains well.
2. Put down seed: Spread the seed evenly over the ground. Use the correct rate for each area.
3. Cover the seed: Lightly cover the seed with soil or a special cover. This helps the seed stay wet and keeps birds away.
4. Water: Water often and lightly. Keep the soil wet so seeds can sprout.
5. Wait for grass to grow: It takes time for all the seeds to sprout and grow into a full grass cover.
The pounds of grass seed per acre golf are highest when starting fresh. This is because you need to create the whole stand of grass from zero. The recommended grass seed density golf for a new course is high to get a good, playable surface quickly.
Overseeding an Existing Golf Course
Overseeding means adding new seed to grass that is already there. Why do this?
* To make thin grass thicker.
* To fix spots where grass has died.
* To put a different kind of grass into the lawn. (Like putting cool-season grass on warm-season grass for winter color).
Overseeding greens seeding rate and fairway grass seed per acre for overseeding are lower than for new construction. You are not starting from scratch. You are just helping the grass that is already there.
Steps for overseeding:
1. Cut the grass short: This helps the new seed reach the soil.
2. Prepare the ground a little: You might poke holes (aeration) or lightly scratch the surface (verticutting). This helps seeds get into the soil.
3. Spread the seed: Put the new seed down. Use the right overseeding rate for the area.
4. Cover the seed: You might put down a thin layer of sand or soil (topdressing). Or just water it in well.
5. Water: Water often and lightly, just like with new seeding.
6. Let the new grass grow: Keep people off the area until the new grass is strong enough.
Overseeding is a normal part of golf course care. It is done to keep the grass healthy and looking good year after year. The golf course seeding rates for overseeding are usually lower, making the cost per acre golf course seeding less than for new construction in most cases.
Golf Course Grass Types and Seeding
The kind of grass used is a big part of the golf course seeding rates. Different grass types have different-sized seeds. They also have different growth habits. Some spread out. Some grow straight up.
Here are some common golf course grass types seeding and what that means for seed amounts:
| Grass Type | Common Use on Golf Course | Seed Size | Seeding Rate (Relative) | Notes |
|---|---|---|---|---|
| Creeping Bentgrass | Greens, sometimes fairways | Very Small | High Weight Rate | Very fine texture, needs high density. |
| Kentucky Bluegrass | Fairways, rough, tees | Small | Medium Weight Rate | Spreads well once started. |
| Perennial Ryegrass | Fairways, tees, overseeding | Medium | Medium-High Weight Rate | Sprouts fast, good for quick cover. |
| Fine Fescue | Fairways, rough | Small | Medium Weight Rate | Good in shade and less water. |
| Tall Fescue | Rough, maybe tees | Large | High Weight Rate | Tough, stands up well. |
| Poa trivialis | Overseeding Greens (Winter) | Small | High Weight Rate | Used for temporary green color. |
| Bermudagrass (Seed) | Fairways, rough, tees (Warm Climates) | Small | Medium-High Weight Rate | Spreads fast in warm weather. |
Even within one grass type, there are many different kinds (called cultivars). Some cultivars might need slightly different rates. A good seed mix for a fairway might have several kinds of Kentucky Bluegrass and Perennial Ryegrass. The mix helps the grass handle different things, like disease or wear.
When looking at golf course grass types seeding rates, remember that the rate is for pounds of seed. If the seeds are small, you get many seeds in a pound. If the seeds are large, you get fewer seeds in a pound. So, even if two grass types need the same number of seeds per square foot, the weight per acre will be different if their seed sizes are different.
The recommended grass seed density golf is about having the right number of plants per square foot or square inch. The seeding rate in pounds per acre is how you try to reach that density.
Calculating Golf Course Seed Amount
Figuring out how much seed you need takes some math. It is not hard math. You need to know the size of the area you want to seed. You also need to know the seeding rate for that area and grass type.
Steps for calculating golf course seed amount:
1. Find the size of the area: Golf courses are measured in acres. But often seeding rates are given per 1,000 square feet or per square meter.
* Know the size of the green in square feet.
* Know the size of the fairway in acres or square feet.
* Know the size of the rough in acres.
* Remember: 1 acre = 43,560 square feet.
2. Find the correct seeding rate: Look up the recommended rate for the specific grass type and area (green, fairway, rough). Also, check if it is for new seeding or overseeding. The rate will be in pounds per 1,000 sq ft or pounds per acre.
3. Do the math:
* If your area is in square feet and your rate is in pounds per 1,000 sq ft:
* (Area in sq ft / 1,000 sq ft) * (Rate in pounds per 1,000 sq ft) = Total pounds of seed needed.
* If your area is in acres and your rate is in pounds per acre:
* (Area in acres) * (Rate in pounds per acre) = Total pounds of seed needed.
* If your area is in square feet and your rate is in pounds per acre:
* (Area in sq ft / 43,560 sq ft per acre) * (Rate in pounds per acre) = Total pounds of seed needed.
Let’s do an example:
You have a 2-acre fairway.
You want to overseed it with a mix at a rate of 2 pounds per 1,000 square feet.
First, find the area in 1,000 sq ft units:
2 acres * 43,560 sq ft/acre = 87,120 sq ft.
87,120 sq ft / 1,000 sq ft per unit = 87.12 units of 1,000 sq ft.
Now, calculate the total seed needed:
87.12 units * 2 pounds per unit = 174.24 pounds of seed.
So, you need about 175 pounds of seed for that 2-acre fairway.
Example 2:
You are building a new green that is 5,000 square feet.
The rate for new Bentgrass greens is 4 pounds per 1,000 square feet.
Area in 1,000 sq ft units:
5,000 sq ft / 1,000 sq ft per unit = 5 units of 1,000 sq ft.
Total seed needed:
5 units * 4 pounds per unit = 20 pounds of seed.
Calculating golf course seed amount helps you buy the right amount. Buying too little means you cannot finish the job. Buying too much wastes money.
It is often wise to buy a little extra seed, just in case. Maybe 5-10% more. This extra seed can be used if some spots need more seed, or for small repairs later.
Interpreting Recommended Seed Density
Recommended grass seed density golf is about how many little grass plants you want in a small space. Think about how many hairs are on your arm. Density is like that, but for grass plants on the ground.
For a putting green, you want it very dense. This means lots of grass plants close together. This makes the surface smooth and firm for the ball to roll. You might want thousands of plants in just one square foot!
For a fairway, you want it dense enough to provide a good lie for the ball. But not as dense as a green. Fewer plants per square foot are okay.
For the rough, the density can be lower. The grass is longer. It does not need to be super thick at the base.
Seed bags or seed companies might give you a target density, like “aim for 1000 plants per square foot.” How do you use that to find the seeding rate in pounds?
You need to know:
1. How many seeds are in one pound of your grass seed? This number is very different for different grass types. Bentgrass has millions of seeds per pound. Tall Fescue has much fewer.
2. What percentage of the seeds will actually sprout? This is called the germination rate. It is usually on the seed bag. It might be 80% or 90%. Not all seeds are alive or healthy enough to grow.
3. What percentage of the seeds that sprout will grow into healthy plants that live? This is harder to know. It depends on the soil, water, weather, and bugs. Maybe only half of the sprouted seeds make it to a full plant.
Let’s try a simple example.
You want 500 plants per square foot.
Your seed has 1 million seeds per pound.
The germination rate is 90% (0.90).
Let’s guess that 50% (0.50) of sprouted seeds become plants.
So, from one pound of seed, the number of plants you might get is:
1,000,000 seeds/pound * 0.90 germination * 0.50 survival = 450,000 plants per pound.
Now, you want 500 plants per square foot.
How many pounds do you need for one square foot?
(500 plants / sq ft) / (450,000 plants / pound) = 0.00111 pounds per square foot.
To get this to pounds per acre:
0.00111 pounds / sq ft * 43,560 sq ft / acre = about 48 pounds per acre.
This math shows how the number of seeds per pound and the success rate of seeds growing affects the pounds per acre needed. That is why golf course seeding rates are given in pounds. It is easier to measure and spread seed by weight. But the goal is always about getting the right recommended grass seed density golf.
Higher seeding rates are used to help make sure you reach the target density, even if some seeds do not sprout or grow. It is a way to be safe.
Cost Per Acre Golf Course Seeding
Seeding a golf course costs money. The cost per acre golf course seeding changes based on several things.
- The cost of the seed: Some grass seeds are much more expensive than others. Bentgrass seed (for greens) costs a lot per pound. Ryegrass or Fescue seed is much cheaper per pound.
- The seeding rate: If you use more pounds of seed per acre, the total cost for seed goes up. Greens are expensive to seed because they use expensive seed and a high rate.
- How much area you are seeding: Seeding the rough is cheaper per acre than seeding a green. But the rough is much bigger. So, the total cost for rough seed can still be large.
- Other costs: Besides the seed, there are costs for:
- Getting the ground ready (soil work, leveling).
- Using machines to spread the seed.
- Watering the seed. Watering can cost a lot of money over weeks.
- Putting down covers or topdressing.
- Paying people to do the work.
Let’s look at seed cost examples (prices can change):
| Grass Type | Approximate Cost Per Pound | Seeding Rate (Example, lbs/acre) | Seed Cost Per Acre (Example) |
|---|---|---|---|
| Bentgrass (Greens) | $10 – $25 | 150 | $1,500 – $3,750 |
| Ryegrass (Fairway) | $2 – $5 | 100 | $200 – $500 |
| Fescue (Rough) | $1 – $3 | 80 | $80 – $240 |
Note: These are just examples. Actual seed costs and seeding rates vary greatly.
Based on these rough numbers, the cost just for the seed per acre can range from under $100 for rough to over $3,000 for greens.
When seeding a whole golf course, the total cost for seed can be huge. A golf course has many acres. A standard 18-hole course might have:
* Greens: Maybe 2-3 acres total
* Fairways: Maybe 25-40 acres total
* Rough: Maybe 30-60+ acres total
If you are seeding a whole new course:
* Greens seed cost: 2.5 acres * $2,500/acre = $6,250 (example)
* Fairway seed cost: 30 acres * $300/acre = $9,000 (example)
* Rough seed cost: 40 acres * $150/acre = $6,000 (example)
Total seed cost for a new course: $21,250 (example)
This is just the cost of the seed! Add in all the other costs (labor, machines, water, etc.), and the total cost for seeding a new golf course is very high.
Overseeding is less expensive per acre than new seeding. But courses do it often. So, the cost of overseeding adds up over time. Overseeding greens seeding rate cost can still be high per acre because Bentgrass seed is expensive. Overseeding fairway grass seed per acre is less costly per acre.
Budgeting for seeding is a big part of managing a golf course. Knowing the golf course seeding rates and the cost per acre golf course seeding for different areas helps plan the money needed.
Figuring Out Factors Affecting Seeding Rates
Let us go back to the factors affecting golf course seeding rates. Thinking about each one helps decide the exact rate to use.
Grass Type Matters Most
We talked about this. Bentgrass needs a high weight rate because the seeds are small and you want high density. Tall Fescue has bigger seeds, so the weight rate might be similar or even higher per acre for similar density. But you generally want lower density in the rough where Tall Fescue is used. So the actual rate used is lower. Always check the specific recommended rate for the exact grass seed mix you are using. Seed companies give this information.
New vs. Old Grass
New construction means you are planting everything. You need enough seed to get the full grass cover started. This needs higher rates.
Overseeding means you are adding to existing grass. Some grass is already there. You need less seed to fill in or boost the density. This needs lower rates.
The Condition of the Soil
Soil is where the seeds grow roots.
* Good soil: Holds water well but drains okay. Has good stuff for plants (nutrients). Seeds can sprout and grow easily. You can use a normal seeding rate.
* Bad soil: Dries out too fast. Or stays too wet. Has hard clumps. Not much plant food. Seeds might not sprout well. Young plants might die. You might need to use a higher seeding rate to make sure enough plants grow. Or, fix the soil first! Adding sand or compost can help bad soil.
How You Seed
There are different ways to put seed down.
* Broadcasting: Just spreading the seed over the ground. This is simple but not all seeds get into the soil well. Some might blow away or get eaten.
* Drill Seeding: Using a machine that cuts small lines in the soil and drops seed right into them. This covers the seed well. More seeds are likely to grow. You might use a slightly lower rate with drill seeding compared to broadcasting, because more seeds are effective.
* Hydroseeding: Mixing seed, water, fertilizer, and a paper/wood mix (mulch) in a tank. Spraying the mix onto the ground. The mulch helps hold water and keeps the seed in place. This can help seeds grow, especially on slopes. You might use a standard rate or adjust based on the specific mix.
Watering After Seeding
Water is key for seeds to sprout.
* Lots of watering (light and often): Keeps the top layer of soil wet. Helps many seeds sprout. You can use the normal rate.
* Little watering: The soil dries out. Seeds die before they sprout. You will lose many seeds. You might need a much higher rate, or you might just fail to get good grass. Watering is maybe the most important thing after seeding.
Time of Year
Seeding works best when the weather is right. Not too hot, not too cold. Soil should be warm enough for seeds to sprout.
* Cool-season grasses (Bentgrass, Ryegrass, Bluegrass, Fescue) grow best in Fall or Spring. Seeding at these times usually works well.
* Warm-season grasses (Bermudagrass, Zoysiagrass) grow best in warm weather, like late Spring or Summer.
Seeding at the wrong time means more seeds might not make it. You might need a higher rate or just wait for a better time. Extreme heat or cold kills seeds and young plants.
Dealing with Pests and Disease
Birds eat seeds. Bugs eat young plants. Fungi can cause disease in new seedlings.
If you know you have problems with birds or bugs, you might use a higher seeding rate to make up for the loss. You can also use things to stop birds (like shiny tape) or spray for bugs and disease.
The Purpose of the Area
As we said, greens need high density, fairways medium, rough low. The recommended grass seed density golf for each area drives the seeding rate. A higher target density means more pounds of seed per acre golf course.
All these factors affect the golf course seeding rates. Good planning means looking at all of them and choosing the right rate for the best chance of success.
Putting it Together: A Table of Typical Rates
This table gives typical ranges for golf course seeding rates. Remember, these are just guides. Always check with seed suppliers or experts for your specific situation.
| Area of Course | Scenario | Common Grass Types | Typical Seeding Rate (lbs/1000 sq ft) | Typical Seeding Rate (lbs/acre) |
|---|---|---|---|---|
| Greens | New Construction | Bentgrass | 2 – 5 | 87 – 218 |
| Overseeding | Bentgrass, Poa trivialis | 1 – 5 (Bent), 5 – 10 (Poa triv) | 43 – 218 (Bent), 218 – 436 (Poa triv) | |
| Fairways | New Construction | Bluegrass, Ryegrass, Fescue Mixes | 3 – 5 | 130 – 218 |
| Overseeding | Ryegrass, Bluegrass, Fescue Mixes | 1 – 3 | 43 – 130 | |
| Rough | New Construction | Fescue, Bluegrass Mixes | 2 – 4 | 87 – 174 |
| Overseeding | Fescue, Bluegrass Mixes | 0.5 – 2 | 21 – 87 | |
| Tees | New Construction | Bluegrass, Ryegrass Mixes | 3 – 6 | 130 – 261 |
| Overseeding | Ryegrass, Bluegrass Mixes | 2 – 5 | 87 – 218 |
These numbers show the big difference in pounds of grass seed per acre golf for different areas. Greens use the most seed per acre, especially when overseeding with high-rate grasses like Poa trivialis for winter. Fairways and tees use moderate amounts. Rough uses the least.
Remember the factors affecting golf course seeding rates. If conditions are not perfect (bad soil, poor watering, bad weather), you might need to use a rate at the higher end of the range shown in the table, or even higher. If conditions are perfect, you might use a rate at the lower end.
Calculating golf course seed amount means using these rates and the size of your area. This helps get the right amount of seed for the job.
Knowing the cost per acre golf course seeding helps plan the budget for the year. Overseeding happens often, so these costs come up regularly.
Frequently Asked Questions
Q: How often should a golf course be seeded?
A: New golf course construction is seeded once at the start. Existing golf courses are overseeded as needed. Greens are often overseeded every year, sometimes more than once. Fairways and tees might be overseeded every few years or to fix damage. Rough is overseeded less often.
Q: Can I use lawn grass seed on a golf course?
A: Golf courses use special types of grass seed. These grasses can be cut very short (like Bentgrass) or handle lots of traffic (like Ryegrass). Lawn grass seed is usually not right for the exact needs of a golf course. Using the correct golf course grass types seeding is important for how the course plays.
Q: What happens if I use too little seed?
A: If you use too little seed, the grass will not be thick enough. You will have bare spots or thin areas. The recommended grass seed density golf will not be met. This makes the playing surface poor. You will have to seed again to fix it.
Q: What happens if I use too much seed?
A: Using too much seed wastes money (cost per acre golf course seeding goes up). Also, too many seedlings trying to grow in one spot can cause problems. They compete for water and food. They can be weaker and more likely to get sick. It is better to use the correct rate than too much.
Q: How long does it take for new grass to be ready to play on?
A: It takes time. Seeds sprout in 1 to 3 weeks usually. But the young grass is weak. For a new golf course, it can take several months to a year or more before it is ready for play. For overseeding, areas might be closed for a few weeks to let the new grass get strong.
Q: Does the quality of the seed matter?
A: Yes! High-quality seed has more live seeds (high germination rate) and fewer weed seeds. Using good seed gives you a better chance of getting the grass you want without lots of weeds. It is worth paying more for good seed.
Figuring out how much seed per acre golf course involves looking at many things. By understanding golf course seeding rates for different areas and grass types, and considering the factors affecting golf course seeding rates, you can make smart choices for planting and caring for the grass.