How much does it cost to reshaft a golf club? Reshafting a golf club generally costs between $40 and $200 per club. The final price depends a lot on the type of new shaft you choose and where you get the work done. This article looks closely at all the costs. We will help you know what to expect when you need to change a shaft.
Image Source: i.redd.it
Factors Affecting Reshafting Costs
Several things change the final golf club shaft replacement cost. It is not just one price for everyone. Knowing these parts helps you see why prices differ.
Shaft Material and Quality
The biggest part of the cost is usually the new shaft itself. Golf shafts come in two main types: steel and graphite.
Steel Golf Shaft Cost
Steel shafts are often used in irons, wedges, and putters. They are known for being heavy and giving players more feel for the clubhead. Steel shafts are usually less expensive than graphite shafts.
- Basic Steel Shafts: These might cost $10 to $30 per shaft. These are standard shafts found in many off-the-shelf iron sets.
- Mid-Range Steel Shafts: These cost about $30 to $60 each. They might offer specific weights, flexes, or playing characteristics.
- Premium Steel Shafts: These can cost $60 to $100 or more per shaft. They use special materials or manufacturing for top performance.
The steel golf shaft cost makes reshafting irons less expensive on average compared to drivers.
Graphite Golf Shaft Price
Graphite shafts are lighter than steel. They are most common in drivers, fairway woods, and hybrids. Some players use graphite in irons too, often to gain swing speed or reduce vibration. Graphite shafts cost more to make than steel shafts.
- Basic Graphite Shafts: These often start around $20 to $50. These are simple shafts good for general use.
- Mid-Range Graphite Shafts: Expect to pay $50 to $100 for these. They might offer better feel, stability, or specific launch conditions.
- Premium Graphite Shafts: These are the most expensive. They can cost $100, $200, $300, or even much more per shaft. These use advanced materials and designs for peak performance. Players seeking specific shot shapes or feel often choose these.
The graphite golf shaft price is a main reason why reshafting a driver or fairway wood costs more than an iron. The price of a new golf shaft changes a lot based on if it’s steel or graphite and how fancy it is.
Type of Golf Club
The type of club matters for the reshafting cost.
- Drivers and Fairway Woods: These almost always use graphite shafts. Since graphite is more expensive, the total golf club shaft replacement cost for these is higher. The shafts are also longer and sometimes use adapter tips which can add complexity or cost.
- Irons: Most irons use steel shafts, which are cheaper. Some players use graphite iron shafts, which raises the cost per iron. The cost to replace iron shaft is typically lower than a driver shaft.
- Wedges: Wedges usually use steel shafts, often specific wedge flex shafts. Costs are similar to iron shafts.
- Hybrids: These can use either steel or graphite. The cost depends on the shaft material chosen.
- Putters: Putters have short, stiff steel shafts. The steel golf shaft cost for a putter is usually low. Reshafting a putter is generally one of the cheapest jobs.
The average cost to reshaft driver is higher than the cost to replace iron shaft because of the shaft material difference.
Labor Cost to Reshaft Golf Club
Besides the shaft itself, you pay for the work to put the new shaft in. This is the labor cost to reshaft golf club. This cost varies depending on where you go and how much work is needed.
- Basic Reshafting: This involves removing the old shaft, preparing the club head, installing the new shaft, and putting on a ferrule (the small black ring above the club head). This might cost $20 to $40 per club.
- Extra Work: Sometimes, the job needs more work. This could be dealing with a broken shaft stuck in the head, or needing special adapter tips found on adjustable drivers. This extra work can add to the labor cost.
- Location: Labor rates differ by location. A busy golf shop in a big city might charge more than a smaller shop in a rural area.
- Expertise: A highly skilled club builder who offers fitting services might charge more for their labor than a general repair shop. Their skill can make sure the new shaft is installed perfectly.
The labor cost to reshaft golf club is a significant part of the total golf club repair cost for this service.
Reshafting Golf Club Price Ranges
Let’s look at the typical range you might pay for reshafting different types of clubs. Remember, these are estimates. Your actual cost could be higher or lower based on the factors above.
Average Cost to Reshaft Driver
Reshafting a driver is usually the most expensive single club job.
- Budget Option: Using a less expensive graphite shaft (under $50) and basic labor ($20-$30). Total: $70 – $80.
- Mid-Range Option: Using a popular graphite shaft ($50-$100) and standard labor ($30-$40). Total: $80 – $140.
- Premium Option: Using a high-end graphite shaft ($100-$300+) and professional labor ($30-$50+). Total: $130 – $350+.
The average cost to reshaft driver falls somewhere in the middle of this range, likely between $100 and $150 for a decent shaft and good work.
Cost to Replace Iron Shaft
Reshafting irons is generally less costly per club, especially with steel shafts.
- Budget Steel: Using a basic steel shaft ($10-$20) and labor ($20-$30). Total: $30 – $50 per iron.
- Mid-Range Steel: Using a popular steel shaft ($30-$50) and labor ($20-$40). Total: $50 – $90 per iron.
- Premium Steel: Using a high-end steel shaft ($60-$100+) and labor ($30-$40). Total: $90 – $140+ per iron.
- Graphite Iron Shafts: Using graphite iron shafts ($20-$100+ per shaft) and labor ($20-$40). Total: $40 – $140+ per iron.
To reshaft a full set of 8 irons, multiply the per-club cost by 8. This shows that reshafting a set can be a significant investment.
Cost to Reshaft Fairway Wood or Hybrid
These clubs use similar shafts to drivers but are often shorter.
- Budget Option: Using a less expensive graphite or steel shaft ($20-$50) and labor ($20-$30). Total: $40 – $80.
- Mid-Range Option: Using a popular shaft ($50-$100) and labor ($30-$40). Total: $80 – $140.
- Premium Option: Using a high-end shaft ($100-$200+) and labor ($30-$50). Total: $130 – $250+.
Cost to Reshaft Wedge or Putter
These are usually the cheapest clubs to reshaft due to shorter, often less expensive shafts.
- Wedge (Steel): Using a steel wedge shaft ($15-$30) and labor ($20-$30). Total: $35 – $60 per wedge.
- Putter (Steel): Using a steel putter shaft ($10-$25) and labor ($20-$30). Total: $30 – $55 per putter.
Overall, the reshhafting golf club price range goes from about $30-$50 for a budget iron or putter up to $300-$350+ for a premium driver shaft replacement. The golf club repair cost for reshafting depends greatly on your choices.
Weighing DIY Golf Shaft Replacement Cost
Some people try to replace a golf shaft themselves. This can save money on labor but has its own costs and risks.
What You Need for DIY
To reshaft a club yourself, you need special tools and materials. The DIY golf shaft replacement cost includes buying these things if you don’t already have them.
- New Golf Shaft: You buy this the same as a professional would. The price of new golf shaft is the same whether you do it yourself or not.
- Shaft Removal Tool: Usually a heat gun or torch to heat the hosel and release the epoxy. This can cost $20 to $50 or more for a good heat gun.
- Vice and Shaft Clamp: To hold the club head securely. A basic vice might be $50+, clamps $10-$20.
- Shaft Cutter: To cut the new shaft to the correct length. A hacksaw with a fine-tooth blade works ($10-$20), or a dedicated shaft cutting tool ($50+).
- Hosel Cleaning Tools: Wire brushes, reamers, or sandpaper to clean old epoxy out of the club head. $10-$30.
- Epoxy: Special two-part epoxy designed for golf clubs. $10-$20 per tube.
- Ferrules: The plastic ring. $1-$5 each. You need the right size.
- Grip Supplies: New grip ($5-$15+), grip tape ($5-$10), grip solvent ($10-$15). You remove the old grip to reshaft, so you usually replace it.
- Measuring Tools: Tape measure, swingweight scale (optional, but recommended for consistency). $10-$100+.
The initial cost of these tools for DIY golf shaft replacement cost can add up quickly, especially if you only plan to do one or two clubs.
Comparing DIY Cost to Professional
If you are only reshafting one driver, the tools might cost $150-$300 or more the first time. Add the shaft price ($50-$150+). Your total first-time DIY cost could be $200-$450+.
A professional might charge $80-$150 total for the same job (shaft + labor).
DIY becomes cheaper per club only if you plan to reshaft many clubs over time, so the tool cost is spread out.
Risks of DIY
Trying to reshaft without experience can lead to problems:
- Breaking the Club Head: Too much heat can damage the club head, especially composite heads.
- Incorrect Shaft Installation: The shaft might not be straight, the epoxy might fail, or the shaft might not be fully seated.
- Wrong Length or Swingweight: Cutting the shaft to the wrong length or not managing swingweight can ruin the club’s feel and performance.
- Injury: Working with heat and tools carries risk.
For most golfers, especially when dealing with expensive drivers or a full set of irons, paying the labor cost to reshaft golf club to a professional is worth it for peace of mind and proper results. The professional golf club repair cost includes their skill and tools.
Why Do Golfers Reshaft Clubs?
People choose to reshaft golf clubs for many reasons.
- Broken Shaft: The most common reason. Shafts can break from hitting something hard, travel damage, or fatigue.
- Wrong Flex or Weight: As swings change or players improve, the original shaft might not fit their swing speed or tempo anymore. A shaft with the right flex (like Regular, Stiff, Extra Stiff) and weight is key for performance.
- Upgrade Performance: Players want a shaft that launches the ball better, spins less, or feels more stable. High-end shafts can offer these benefits.
- Keep a Favorite Club Head: A golfer might love their old driver head but want modern shaft technology. Reshafting lets them keep the head they like.
- Cost Savings vs. New Club: Sometimes, reshafting is cheaper than buying a brand new club, especially if the club head is still good. You pay the price of new golf shaft plus labor instead of the full club price.
Reshafting is part of overall golf club repair cost and maintenance.
The Reshafting Process
Knowing what happens when you take a club for reshafting helps explain the labor cost.
- Remove Old Shaft: The old grip is removed. The hosel area is heated carefully to loosen the epoxy bond. The old shaft is pulled out.
- Prepare the Head: Old epoxy is cleaned out of the hosel using brushes or reamers. The inside is made clean and ready for the new epoxy.
- Prepare the New Shaft: The tip of the new shaft is prepped (often by sanding lightly) where it will go into the head. The shaft is cut to the correct length from either the tip (for launch/spin tuning, called ‘tipping’) or the butt end.
- Install the Shaft: New golf club epoxy is mixed and applied to the shaft tip and inside the hosel. The shaft is pushed fully into the head. The ferrule is slid down to the hosel.
- Curing: The club is placed upright to allow the epoxy to dry completely. This usually takes 12-24 hours.
- Finishing: The ferrule is shaped smoothly to the hosel diameter. A new grip is installed.
This process requires skill and specific tools to do right. The labor cost to reshaft golf club covers this work.
Other Related Golf Club Repair Costs
When you think about reshafting, other related costs might come up. These are part of broader golf club repair cost.
- Grip Replacement: You almost always replace the grip when reshafting. A new grip costs $5-$15+, plus a small labor charge if done separately ($3-$5). Often included in reshaft labor.
- Ferrule Replacement: A new ferrule is always used. Cost is minimal ($1-$5) and included in labor.
- Swingweighting: Changing a shaft changes the club’s balance (swingweight). Club builders can adjust this using weights in the shaft tip or grip end. This adds to the complexity and potentially the labor cost.
- Adapter Installation: For adjustable clubs, the shaft might have an adapter tip. Transferring or installing a new adapter can add to the labor time and cost ($10-$20+).
- Inspection: A good repair shop will inspect the club head for damage before reshafting.
These small items contribute to the overall golf club repair cost.
Factors That Can Lower or Raise the Price
Knowing what makes the price go up or down helps you estimate your golf club shaft replacement cost.
Lowering Costs:
- Choosing a Cheaper Shaft: Steel instead of graphite, or a basic model instead of premium.
- Reshafting Irons (Steel): The cost to replace iron shaft is lower per club.
- Bulk Discount: Some shops might offer a small discount if you reshaft multiple clubs at once.
- Finding a Local, Independent Club Builder: Their overhead might be lower than a big retail store.
Raising Costs:
- Choosing a Premium Shaft: High-end graphite shafts greatly increase the price. The graphite golf shaft price can be hundreds of dollars.
- Reshafting a Driver (Graphite): The average cost to reshaft driver is high due to shaft cost.
- Complex Job: Dealing with a broken shaft piece stuck in the head takes more time and effort.
- Rush Service: Needing the club back quickly might cost extra.
- High-End Retail Store: Larger stores might have higher labor rates.
- Brand Name Shafts: Shafts from well-known performance brands often cost more than generic options. This impacts the price of new golf shaft.
The reshhafting golf club price range is wide because of these variables.
When Is Reshafting Worth It?
Deciding whether to reshaft or buy a new club is a common question.
Reshafting is often worth it when:
- You love the club head. If the head performs well for you, giving it a new shaft can feel like a new club for less money.
- The shaft is broken, but the head is fine. It’s cheaper to replace a broken shaft than buy a whole new club.
- You need a very specific shaft. Sometimes the exact shaft you need isn’t available in a standard club model. Reshafting lets you get the perfect fit.
- You want to upgrade performance on a still-good club head. A better shaft can sometimes unlock more speed or consistency.
Reshafting might not be worth it when:
- The club head is old or outdated. Newer club head technology might offer bigger performance gains than just a new shaft.
- The cost of the shaft plus labor is close to the price of a new club. Compare the total golf club shaft replacement cost to the price of a new model.
- You aren’t sure what shaft you need. Blindly putting in a new shaft might not improve your game. A fitting is recommended, which adds cost.
Think about the total golf club repair cost versus buying new. Sometimes reshafting gives you more performance per dollar spent if your club head is still good.
Deciphering Golf Club Repair Costs
Looking closer at golf club repair cost helps put reshafting in context. Reshafting is one of the more common repairs, along with regripping and adjusting lofts/lies.
- Regripping: Costs $5-$15+ per club for the grip, plus $3-$5 labor (often free if you buy the grip there). Much cheaper than reshafting.
- Loft/Lie Adjustments: Bending irons or wedges costs $3-$5 per club. Quick and inexpensive.
- Head Repair (Dents, Skymarks): Can be difficult or impossible, or costly if possible. Reshafting is more common for performance reasons.
The reshafting golf club price range shows it’s a moderate to significant golf club repair expense, depending on the shaft chosen.
The Price of New Golf Shaft vs. Full Club
Let’s compare buying just a shaft to buying a whole new club.
- A basic new driver might cost $300-$500.
- A premium new driver can cost $500-$600+.
- A basic new set of irons might cost $500-$800.
- A premium new set of irons can cost $800-$1200+.
Now compare the price of new golf shaft plus labor:
- Reshafting a driver with a premium shaft might cost $150 (shaft) + $40 (labor) = $190.
- Reshafting a set of 8 irons with mid-range steel shafts might cost 8 * ($40 shaft + $30 labor) = 8 * $70 = $560.
In these examples, reshafting is less expensive than buying new, assuming your existing club head is high quality and suits you. However, if you put a $300 shaft in an old driver head and pay $50 labor, your $350 cost might be close to a new entry-level driver.
It really depends on the shaft you pick and the club you own. The golf club shaft replacement cost calculation needs you to compare the total price to the cost of a new club you would actually buy.
Frequently Asked Questions About Reshafting Costs
Here are some common questions people ask about the cost to reshaft a golf club.
h4 Does the brand of the club head affect the reshafting cost?
No, not usually. The labor cost to reshaft golf club is generally the same no matter the brand of the head (Callaway, TaylorMade, Titleist, etc.). The cost is about the work needed and the shaft material. Special adapter tips on some adjustable clubs might add a little to labor.
h4 Can I get my clubs fitted for a new shaft?
Yes, and it is highly recommended. A club fitting helps find the best shaft for your swing speed, tempo, and desired ball flight. Fitting services add to the overall cost ($50-$150+), but ensure you are paying for the right shaft. This prevents wasting money on a shaft that doesn’t work for you. The fitting cost is separate from the golf club shaft replacement cost.
h4 Is the ferrule included in the labor cost?
Usually, yes. The small cost of the ferrule ($1-$5) is typically built into the labor cost to reshaft golf club.
h4 How long does reshafting take?
The actual work takes under an hour per club. However, the epoxy needs to dry completely. This ‘curing’ time is usually 12-24 hours. So, expect to leave your club at the shop for at least a day, sometimes longer if they are busy.
h4 Is it cheaper to buy a used club with the shaft I want?
Maybe. Sometimes you can find a used club that already has a desirable aftermarket shaft. Check the condition of the head and shaft carefully. Compare the used price to the golf club shaft replacement cost of putting that same shaft into your current club.
h4 Does the shaft warranty transfer if I reshaft?
Shaft warranties usually cover manufacturing defects. If you break the shaft hitting something or by improper installation (especially with DIY), the warranty likely won’t cover it. Check the specific shaft warranty details.
h4 Should I replace just one iron shaft or the whole set?
If only one iron shaft is broken, you can replace just that one. If you want to change shafts for performance reasons (like needing a different flex), it is best to do the whole set of irons so they all feel and perform the same. The cost to replace iron shaft is per club, so doing a whole set adds up.
h4 What is tipping?
Tipping is cutting a small amount off the tip end of the shaft before installing it in the club head. This makes the shaft slightly stiffer in the tip section, which can lower ball flight and spin. It requires knowing what you are doing and affects swingweight. It’s part of the skill covered by the labor cost to reshaft golf club for custom work.
Conclusion
Reshafting a golf club offers a way to fix a broken club or upgrade performance without buying entirely new equipment. The golf club shaft replacement cost varies widely. It depends mainly on whether you choose a low-cost steel shaft or an expensive premium graphite shaft, and who does the work.
The reshhafting golf club price range starts around $30-$50 for a simple iron or putter with a basic steel shaft and goes up to $300-$350 or more for a driver with a top-of-the-line graphite shaft. The average cost to reshaft driver is usually over $100, while the cost to replace iron shaft is often under $80.
Remember to factor in the labor cost to reshaft golf club, which adds $20-$50+ per club depending on the place and complexity. While DIY golf shaft replacement cost can save on labor, the initial tool expense and risk make it less appealing for many.
Consider your current club’s value and your performance goals. Sometimes the price of new golf shaft plus labor gives you the best value for improving your game compared to buying a whole new club. Get quotes from local repair shops or club builders to know the exact golf club repair cost for your specific needs.